Главная страницаe-mailКарта сайта русская версияenglish version

Attention! New product

Godograf-Universal
Godograf-Universal

Product Details
BP-210RM
BP-210RM

Product Details
Rubezh-М
Rubezh-М

Product Details
Integral
Integral

Product Details
Focus-SМ 16/32
Focus-SМ 16/32

Product Details
RLD Redut-300 (-K, -S, -Т)
RLD Redut-300 (-K, -S, -Т)

Product Details
Home arrow Products arrow Alarm systems & complexes arrow KS - 195K
 

NIKIRET - Russian leader of security technologies




KS - 195K


__



   Alarm complex is intended to protect long perimeters of sites, local zones and rooms with the capability of organization of access mode through the vehicle gates, wickets and etc. according to the commands from the control board of the complex.

   The complex consists of stationary and local equipment. The stationary equipment is installed in the room of duty operator. The local equipment is used out-of-doors.

   The main detector providing control of long protected sectors is an electro-contact detector built into the complex local unit. One unit provides control of two protective sectors up to 500m long each and it is located at the joint of protected sectors.

   To improve the protection efficiency of long sectors the additional detectors can be connected (up to two additional detectors at each sector). The length of connecting cables to each of the additional detectors can be up to 500 m.

   The gates (wickets) are equipped with special locks generating alarms at their unauthorized opening. To provide control of locks an additional control plate is installed in the electronic unit. The locks can be opened without generating alarms only after a special command is received from the stationary equipment.

   The local equipment of the complex installed at a protected boundary is connected to the stationary equipment located in the room of duty operator by means of cable connecting lines. A separate four-wire connecting line (cable КСПП 1х4х0.9) is used for each flank, therewith, the length of a connecting line from stationary equipment to the beginning of the flank (approach) can be up to 10 km (depending on the power consumed by a detector at the flank), and from the stationary equipment to the end of the flank is 20 km. The length of connecting lines from indoor detectors to the stationary equipment can be up to 1.5 km.

    

MAIN SPECIFICATIONS:

Maximum length of a protected boundary, kmup to 20 (2х10)
Quantity of controlled long sectorsup to 40
Quantity of address detectors at one sectorup to 3
Power consumption of detectors connected to one local unit, Wup to 0,6
Quantity of controlled perimeter sectors and outpost roomsup to 8
Quantity of electro-operated locksup to 4
The complex is supplied from:
    mains (the main source), V
    storage battery (back-up power source), V

    capacity of a back-up power source, A/h

165...320
22...28 
55 minimum
Operating temperature range, °С
    for stationary equipment
    for local equipment

+ 5... + 40
- 50... + 50

 

 

SPECIFIC FEATURES (ADVANTAGES):

  • Ability to disconnect (to switch off protection) any number of sectors.
  • Display of incoming information in general form on dot-matrix (LED displays) displays and in detail on the character (matrix) display.
  • Incoming information storage with ability to read it from the storage by an operator's command stating the date and the time of entry, mode of detailed monitoring.
  • Check of leakage resistance in power supply circuit.
  • Ability to transmit messages to PC.

NOTE:

    As a sensing element at each sector an alarm fence made of barbered wire (up to 24 threads of КЦП wire) is used. Protection against harmful voltages generated in the fence and connecting lines during lightning is provided.

  Additional detectors (up to two additional detectors at each sector) can be connected to increase the efficiency of long sectors protection. Length of connecting cables to each of additional detectors can be 500m.

  Electronic unit is used to protect gate sectors (one unit for each sector). A built-in contact detector operates as the main detector of the gates. Gates (wickets) are equipped with special locks able to generate alarms at their tampering. An additional control card is installed in the electronic unit to provide control of locks. Locks can be opened without generation of alarms only after a special command is sent to it from the stationary equipment.